Skip to product information
1 of 4

Core Protection Set - MTB

Core Protection Set - MTB

Material
Regular price £16.00 GBP
Regular price Sale price £16.00 GBP
Sale Sold out

Frame Protection kit designed for the geometries of MTB and DH bikes, with relief cuts to ensure a clean install on curved tubing. Made from automotive grade protective clear film this kit offers good protection against riding damage and scratches during transportation. 

 

Dimensions

1x: Down Tube Lower - 318mm x 55mm
1x: Modular Top Tube - 213mm x 48mm
3x: Extension Modules - 40mm x 48mm
1x: Down Tube Upper - 265mm x 48mm
2x: Large Patch - 54mm x 24mm
1x Swing Arm - 220mm x 55mm (narrows to 44mm)
2x Swing Arm Extensions - 44mm x 28mm

Materials

Gloss Clear - 150 micron
Matt Clear - 120 micron
Carbon Effect - 150 micron

Application

Frame Protection Film

Crank Protector Application

Slip solution is 1 drop Baby Shampoo/Washing Up Liquid to 500ml water 

Dry Application

  1. Ensure component is at room temperature (avoid installation below 12°C/53 F)
  2. Clean surface using alcohol based cleaner*
  3. Lay protector onto frame/crank (wet finger tips to avoid print transfer)
  4. Contour using light pressure - use heat if required
  5. Heat vinyl to activate adhesive*
  6. Allow to cure for 1 hour

________________________________________________

Decal/Sticker Application

________________________________________________

Iron-On Reflective

  1. Peel away excess material revealing the strips
  2. Cut out required strip
  3. Place onto t-shirt with the smooth, shiny backing plastic facing upwards
  4. Place a paper towel or teflon sheet on top of the strip (DO NOT iron directly onto the backing plastic)
  5. Press for 15 seconds at 150°C (Medium)
  6. Allow to cool before peeling away backing plastic

Aftercare: Max 60 wash | Tumble Dry Safe | Do Not Dry Clean  

_______________________________________________

Removal

⚠️ All our adhesive products require the underlying surface be undamaged, the application and removal are at the judgement and risk of the installer - info@cyclistick.co.uk if you are in any doubt.

*Use a heat gun or hairdryer, avoiding direct contact or prolonged exposure.

View full details