FLO Disc Wheel Valve Covers
FLO Disc Wheel Valve Covers
Couldn't load pickup availability
Specifically designed to fit FLO disc wheels. These covers have some unique design that aims to cover the vale opening on quite a complex surface.
Pack of 6
Dimensions
Dimensions
100mm x 64mm
Materials
Materials
Vibrant Colour - 80 micron
Application
Application
Frame Protection Film
Crank Protector Application
Slip solution is 1 drop Baby Shampoo/Washing Up Liquid to 500ml water
Dry Application
- Ensure component is at room temperature (avoid installation below 12°C/53 F)
- Clean surface using alcohol based cleaner*
- Lay protector onto frame/crank (wet finger tips to avoid print transfer)
- Contour using light pressure - use heat if required
- Heat vinyl to activate adhesive*
- Allow to cure for 1 hour
________________________________________________
Decal/Sticker Application
________________________________________________
Iron-On Reflective
- Peel away excess material revealing the strips
- Cut out required strip
- Place onto t-shirt with the smooth, shiny backing plastic facing upwards
- Place a paper tower or teflon sheet on top of the strip (DO NOT iron directly onto the backing plastic)
- Press for 15 seconds at 150°C (Medium)
- Allow to cool before peeling away backing plastic
Aftercare: Max 60 wash | Tumble Dry Safe | Do Not Dry Clean
_______________________________________________
Removal
⚠️ All our adhesive products require the underlying surface be undamaged, the application and removal are at the judgement and risk of the installer - info@cyclistick.co.uk if you are in any doubt.
*Use a heat gun or hairdryer, avoiding direct contact or prolonged exposure.
Share
![FLO Disc Wheel Valve Covers](http://cyclistick.co.uk/cdn/shop/products/flowimg.png?v=1567757947&width=1445)
![FLO Disc Wheel Valve Covers](http://cyclistick.co.uk/cdn/shop/products/flowimg1.png?v=1567757947&width=1445)
![FLO Disc Wheel Valve Covers](http://cyclistick.co.uk/cdn/shop/products/IMG_0761-WEB.jpg?v=1567757896&width=1445)