Skip to product information
1 of 4

Top Tube Protector - MTB

Top Tube Protector - MTB

Material
Regular price £7.00 GBP
Regular price Sale price £7.00 GBP
Sale Sold out

The modular top tube protector is designed to work with both Road and Mountain Bikes with the modular sections allowing for placement on curved tubes. 

If you're looking for a straight cut top tube protector our road downtube piece can work great too.

Dimensions

1x: Modular Top Tube - 213mm x 48mm
3x: Extension Modules - 40mm x 48mm

Materials

Gloss Clear - 150 micron
Matt Clear - 120 micron
Carbon Effect - 150 micron

Application

Frame Protection Film

Crank Protector Application

Slip solution is 1 drop Baby Shampoo/Washing Up Liquid to 500ml water 

Dry Application

  1. Ensure component is at room temperature (avoid installation below 12°C/53 F)
  2. Clean surface using alcohol based cleaner*
  3. Lay protector onto frame/crank (wet finger tips to avoid print transfer)
  4. Contour using light pressure - use heat if required
  5. Heat vinyl to activate adhesive*
  6. Allow to cure for 1 hour

________________________________________________

Decal/Sticker Application

________________________________________________

Iron-On Reflective

  1. Peel away excess material revealing the strips
  2. Cut out required strip
  3. Place onto t-shirt with the smooth, shiny backing plastic facing upwards
  4. Place a paper tower or teflon sheet on top of the strip (DO NOT iron directly onto the backing plastic)
  5. Press for 15 seconds at 150°C (Medium)
  6. Allow to cool before peeling away backing plastic

Aftercare: Max 60 wash | Tumble Dry Safe | Do Not Dry Clean  

_______________________________________________

Removal

⚠️ All our adhesive products require the underlying surface be undamaged, the application and removal are at the judgement and risk of the installer - info@cyclistick.co.uk if you are in any doubt.

*Use a heat gun or hairdryer, avoiding direct contact or prolonged exposure.

View full details